With the new MC3001 motion controllers, available as MC 3001 B (board-to-board connectors) or MC3001P (28-pin plug connector), FAULHABER rounds out the MC V3.0 generation of controllers at the lower end of the performance spectrum. The controllers are extremely miniaturised and, with 1.4 amperes in continuous operation and up to 5 amperes peak current, are very powerful. They are designed as slaves for control and positioning tasks of DC-micromotors, linear DC servomotors or brushless DC-motors.
The new MC 3001 are unhoused versions of
the FAULHABER motion controllers and , by means of the integrated output stage
with optimized current measurement, can control DC-micromotors, linear
DC-servomotors or brushless DC-motors from the FAULHABER product line from 6 to
30 millimeters. They are configured here via the FAULHABER Motion Manager
software V6 (version 6.8 and higher).
The very good EMC behaviour of the new motion controllers has been
certified by external laboratories.
Miniaturisation and dynamics
With an overall height from 2.6
millimeters and a format from 16x27 millimeters, the new motion controllers are
extremely miniaturised. They feature very high control dynamics and can be
operated with 1.4 amperes in continuous operation and with up to 5 amperes peak
current. With the new variants, FAULHABER has rounded off its motion controller
portfolio at the lower end.
In spite of their extremely compact
design, the just thumb-sized controllers feature the same functionality as well
as the same interfaces (RS232 and CANopen) and encoder interfaces as the other
more powerful products of the MC V3.0 generation. As an intelligent driver
module, they are especially well suited for installation in customer-specific
applications. The full thermal protection of the motors is ensured with the
integrated thermal models and by means of the high PWM frequency.
The ideal fields of use of the new motion
controllers of the MC 3001 series are applications from the areas of robotics,
automation technology, machine construction as well as medical and laboratory
technology. Applications in these areas often have limited space yet call for
high control dynamics and high performance.
Two variants available
They are available in two variants: the
MC3001 B can be plugged into a motherboard with three micro board-to-board
connectors whereas the MC3001 P can be plugged in via a 28-pin plug connector.
To help customers quickly and easily get to work on the development of their
drive system, FAULHABER offers a starter kit that includes, among other things,
a motherboard and makes it easier to get started. In addition, up to six
different motherboard variants (depending on the variant of the motion
controller and the used motor) are available. To meet specific customer needs,
other boards can be created that may also include, e.g., an EtherCAT interface.
The motion controllers are designed for
slave operation and can be easily and quickly combined with a number of
higher-level master systems via standard interfaces.
After basic commissioning via Motion
Manager, the controllers can alternatively also be operated at any time in
stand-alone mode by means of integrated sequence programs.
FAULHABER releases two new motion controllers: MC 3001 B (foreground)
and MC 3001 P (middle). What they have in common is the extreme
miniaturisation. Shown in the background
is a matching motherboard from the starter kit
View website
