24-24 April 2023
Qmed+
REGISTER NOW
keyboard_arrow_left See all news

Recent News

10 Jan, 2023 /
Qosina
Qosina introduces Irradiate to Order service for single-use bioprocess components
Qosina introduces an Irradiate to Order service for its single-use bioprocess component ...
09 Jan, 2023 /
Qosina
Qosina Announces Partnership with ILC Dover and Expanded Portfolio of Liquid Bag Chambers
Qosina announces a partnership with ILC Dover, a leader in the innovative design and pro...
05 Jan, 2023 /
Life Science Outsourcing, Inc.
Life Science Outsourcing Completes Acquisition of J-Pac Medical
Expands into biomaterials and diagnostics end-markets, broadens service offerings, and s...
04 Jan, 2023 /
Qosina
Qosina introduces AseptiQuik® G DC Series Connectors
Qosina announces the addition of the AseptiQuik® G DC Series connectors to its extensiv...
17 Nov, 2022 /
PTI Engineered Plastics, Inc.
PTI Engineered Plastics Receives MedAccred® Plastics Continuing Accreditation
PTI Engineered Plastics recognized for its commitment to continual improvement in medica...
Master Bond Inc.
/ 31 Jul, 2019
keyboard_arrow_left See all news

UV22DC80-1Med: Dual Curing Epoxy Meets Biocompatibility and Cytotoxicity Requirements

Not only does it pass USP Class VI tests for biocompatibility, but it also meets ISO 10993-5 for cytotoxicity, making it ideal for many applications in the medical device industry.

As a nanosilica filled system, UV22DC80-1Med offers low shrinkage upon cure, excellent abrasion resistance and dimensional stability with a low coefficient of thermal expansion of 30-35 x 10-6 inch/inch/°C. It is a reliable electrical insulator with volume resistivity of more than 1014 ohm-cm and dielectric constant of 3.85 at 60 Hz. UV22DC80-1Med is optically clear with a refractive index of 1.52.

The UV curing process for UV22DC80-1Med takes only 10-30 seconds at a 365nm wavelength and 10-40 mW/cm2of UV output. The heat curing process can be initiated at 80°C, making it highly desirable in applications involving heat sensitive components. Optional post curing at 125-150°C for 15-30 minutes will increase the glass transition temperature to over 125°C. This system is not oxygen inhibited.

UV22DC80-1Med has a low viscosity of 500-3,500 cps at 75°F (~ 23°C). It bonds well to a variety of substrates including metals, glass, ceramics and most plastics. This compound has very good resistance to various sterilization methods including autoclaving and many chemical sterilants. It is available for use in 30 cc EFD syringes, ½ pint, pint, and quart containers.

Processing. Please wait.
Loading...