24-24 April 2023
Qmed+
REGISTER NOW
keyboard_arrow_left See all news

Recent News

10 Jan, 2023 /
Qosina
Qosina introduces Irradiate to Order service for single-use bioprocess components
Qosina introduces an Irradiate to Order service for its single-use bioprocess component ...
09 Jan, 2023 /
Qosina
Qosina Announces Partnership with ILC Dover and Expanded Portfolio of Liquid Bag Chambers
Qosina announces a partnership with ILC Dover, a leader in the innovative design and pro...
05 Jan, 2023 /
Life Science Outsourcing, Inc.
Life Science Outsourcing Completes Acquisition of J-Pac Medical
Expands into biomaterials and diagnostics end-markets, broadens service offerings, and s...
04 Jan, 2023 /
Qosina
Qosina introduces AseptiQuik® G DC Series Connectors
Qosina announces the addition of the AseptiQuik® G DC Series connectors to its extensiv...
17 Nov, 2022 /
PTI Engineered Plastics, Inc.
PTI Engineered Plastics Receives MedAccred® Plastics Continuing Accreditation
PTI Engineered Plastics recognized for its commitment to continual improvement in medica...
Master Bond Inc.
/ 02 Apr, 2020
keyboard_arrow_left See all news

Toughened, Urethane Based Epoxy System Meets USP Class VI Specifications

Master Bond EP30DPBFMed is a two part, flexibilized epoxy-urethane hybrid system that can be used for bonding, sealing, coating, and encapsulation. It is formulated for disposable and reusable medical devices, meeting USP Class VI requirements while also complying with RoHS3 in accordance with the EU directive 2015/863/EU. EP30DPBFMed is resistant to thermal cycling and sterilization, withstanding exposure to gamma radiation, e-beam, EtO, as well as other liquid sterilants.

Its low viscosity of 3,000 to 6,000 cps for Part A, and 200 to 500 cps for Part B, makes it readily pourable and ideal for potting and casting. EP30DPBFMed has a long working life of 60 to 90 minutes per 100 grams mass at 75°F, and features a low exotherm during the curing process. The system contains no solvents or diluents.

Due to the addition of a urethane based flexibilizer, EP30DPBFMed offers both a higher abrasion resistance and a higher elongation when compared to a typical epoxy system. At room temperature, it has an elongation at break of 20 to 40%, and Shore D hardness of 30 to 50. It is useful in applications where low stress is important, due to its low modulus value. This compound is electrically insulative with a volume resistivity greater than 1014 ohm-cm. EP30DPBFMed is serviceable over a wide temperature range from cryogenic 4K to 250°F.

This formulation is available for use in a variety of standard packaging options ranging in size from ounce kits to gallon kits. Specialty packaging in premixed & frozen syringes, and gun applicators with double barrel cartridges is also available.

Processing. Please wait.
Loading...