24-24 April 2023
Qmed+
REGISTER NOW
keyboard_arrow_left See all news

Recent News

27 Sep, 2022 /
Nordson Medical
Nordson MEDICAL Opens Tecate Mexico Medical Device Manufacturing Facility
Nordson MEDICAL announces the official opening of its Tecate, Mexico, Medical Device Man...
14 Sep, 2022 /
Qosina
Qosina Expands Class VI Tubing Portfolio for Single-Use Medical Device and Bioprocess Applications
Qosina expands its Class VI tubing portfolio with several new brands
26 Aug, 2022 /
Smalley
Smalley Wins GM Supplier Quality Excellence Award for 10th Consecutive Year
Smalley receives the General Motors Supplier Quality Excellence Award for the 10th conse...
26 Jul, 2022 /
Qosina
Qosina Adds the AseptiQuik STC Series to Its Line of Steam-Thru Connectors
Qosina introduces the AseptiQuik® STC connectors to its line of Steam-Thru® connectors
08 Jul, 2022 /
Smalley
Smalley Europe Celebrates 20 Years of Local Service
Smalley celebrates 20 years in the European market
Master Bond Inc.
/ 02 Feb, 2021
keyboard_arrow_left See all news

Epoxy with High Elongation Passes ISO 10993-5 Certification for Cytotoxicity

It meets the requirements of ISO 10993-5 testing and is therefore considered to be non-cytotoxic. This compound can be used for bonding, sealing, coating and encapsulating.

EP40Med resists sterilization to gamma, EtO, chemicals, and liquid disinfectants. It is recommended for use in medical device manufacturing and repair for both disposable and reusable instruments. EP40Med is an effective adhesive for applications where toughness and flexibility along with good structural strength are needed. The formulation bonds well to polycarbonates, acrylics, metals, ceramics and composites. This flexible epoxy has an elongation of 80-90%, a lap shear strength of 1,600 to 1,800 psi and a low tensile modulus of 25,000 to 50,000 psi. EP40Med is a reliable electrical insulator with a volume resistivity over 1012 ohm-cm.

This system is easy to use with a one to one mix ratio by weight or volume and a low to moderate viscosity of both parts A and B. The working life of a mixed 100 gram batch is approximately 120-150 minutes. The optimal cure schedule is overnight at room temperature followed by a post cure for 2-3 hours at 150°F. The product is available in 1/2 pint, pint, quart, and gallon kits. Specialty packaging is available in gun dispensers and premixed and frozen syringes.

Processing. Please wait.
Loading...